Header Ads

The User Manual for iKuun i200 Vape Mod

Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult our facebook page, or visit our website at www.istick.org.

About How to use it?

Power on/off: press the fire button 5 times in quick succession to turn on/off the device. Keep holding the fire button to take a puff when the device is powered on.

Stealth on/off: Press the fire button and “-” button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see current setting.

Adjustment buttons lock/unlock: keep pressing “+” button and “-” button simultaneously for two seconds when the device is powered on, then the adjustment button will be locked and the screen will display “Key Lock”. In the same way, the adjustment button can be unlocked and the screen will display “Key Unlock”.

Switch display mode: keep pressing “+” button and “-” button simultaneously for two seconds when the device is powered off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation.

Parameter setting: Parameters include V (current voltage), A (current amp), P (total vaping puffs) and S (total vaping seconds).
1. When in VW (Power) Mode, press the fire button 3 times, and then press “-” button once. When the current parameter is flashing, press “+” button to switch among V, A, P and S parameters.
2.When in TEMP/TCR mode, if current parameter that is displayed on the screen is W, press the fire button 3 times, and then press “-” button twice. When W is flashing, press the “-” button once again to A, and then press ”+” button once repeatedly to P, S and back to W.

Preheat function: When the device is powered on, simply keep holding the fire button and “+” button simultaneously to enter into the regulation interface. Then press “+” button once to enter into Preheat Setting Menu. Press the fire button to switch between preheat power and time. Press “+” or “-” button to adjust. Long press the fire button to confirm.

Power Bank Function: When the device is powered on, press the fire button and “+” button simultaneously, and then press “+” button twice to enter into the USB Charge interface and press “-” button to switch between On and Off. Choose On the activate reverse charge function. Press the fire button 3 times and then press “+” button to switch between different modes. Choose the USB Charge mode, connect with your electronic device via the USB cable to charge.

Switch vaping modes: press the fire button 3 times in quick succession to enter into the mode options. Then press “+” button to switch between VW/TEMP (Ni, Ti, SS316)/TCR (M1, M2, M3) modes. Press the fire button once to confirm. In TEMP / TCR mode, while it is flashing, press “-” button to enter into its subsidiary menu. Then press “+” button to choose among: Ni/Ti/SS316 (TEMP mode) or M1/M2/M3 (TCR mode). Press the fire button to confirm.

1)VW Mode:
When set in VW mode, the device can support a coil whose resistance is within the range of 0.1ohm - 3.5ohm.
Adjust wattage: in this mode, the output wattage can be adjusted from 1W to 200W by pressing “+” button or “-” button, “+” button to increase and “-” button to decrease. Long press “+” or “-” button can rapidly increase or decrease the wattage level.

2) TEMP (Ni, Ti, SS316)/ TCR (M1, M2, M3) Mode:
When set in TEMP (Ni, Ti, SS316) mode, the device can separately support Nickel 200, Titanium, and Stainless Steel 316 coils. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05ohm - 1.5ohm)

The Setting of TCR (M1, M2, M3) Mode: when the device is powered off, keep pressing the fire button and the “+” button simultaneously, then you will enter into the TCR (M1, M2, M3) set menu:
1. Press the “+” or “-” button to choose among M1, M2 and M3 modes;
2.Press the fire button once to TCR value setting, and then press “+” or “-” button to increase or decrease the TCR value according to the material of the coil you use;
3.Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting.

Following are different TCR value ranges for different coils for your reference:

Note: 1. The TCR value in the sheet is 10 multiplied of the actual TCR.
2. Our total range of TCR value is 1-1000.

Adjust wattage: In TEMP/TCR mode, the output wattage can be adjusted from 1W to 200W. Press the fire button 3 times then press “-” button to enter into the sub-menu. When it is flashing, press “-” button once again to select the wattage, and then press “+” button and then “-” button to adjust.
Adjust Temperature: in TEMP (Ni, Ti, SS)/TCR (M1, M2, M3) mode, temperature can bu adjusted from 100-315℃ or 220-600℉ by pressing “+” or “-” button, “+” button to increase and “-” to decrease. Each press of the “+” or “-” button will increase or decrease the temperature setting by 5℃ or 10℉. Keep pressing “+”or “-” button without looseness can rapidly increase or decrease temperature setting.

Ahout How to put custom logo in the device?
Download the file on our blog, plug the device in with USB cable to a computer, and double click the EleafUpdate.exe. Then click “LOGO” and open the image you choose to put it in the device. Finally press the fire button and “+” button simultaneously to enter into the “LOGO On/Off” interface. Simply choose on/ off by pressing the “-” button and press the fire button once to confirm your choice.

Note:
1. Please make sure the image you choose is a monochrome image of 64*40 pixels in the format of bmp.
2.If you fail to put the custom logo in and the device shuts down, press the “-” button once to restart the device.

About Functions of Micro USB Port
Charging:
The device can be charged through USB Port via wall adapter or a computer.
Firmware Upgrading:
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

Indications and Protections
Atomizer Protection: each time when vaping time exceeds 10 seconds, the output shuts off automatically with “Over 10s” display on the screen.

Atomizer Low Alert: when the resistance of coil is lower than 0.1ohm in VW mode or lower than 0.05ohm in TEMP/TCR modes, the screen will display “Atomizer Low”
Atomizer Short-circuit & No Atomizer Protection: when atomizer short-circuit occurs, the screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer connected.

Low-voltage Protection: when the voltage of the batteries is below 3.3V, the screen will first display “Battery Low” and then “Lock”. Charge the device to reactivate it.

Temperature Protection: in TEMP/TCR modes, when the actual temperature of coil reaches the set temperature, the screen will display “Temp Protection”, You can continue to use the device normally.

Temperature Alert: if the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down.

Weak Battery Alert: in all vaping modes, when the device is working with an atomizer and the voltage of the batteries drops below 2.9V, the screen will display “Weak Battery”, Meanwhile, the output power will be reduced accordingly.

Charge Error Alert: when no current is detected in charging state, the screen will display “Charge Error”.
Check USB Alert: if the voltage of the USB charge is 5.8V or higher, the device will display “Check USB” when plugged in or vaping.

Temperature Protection of Charging: when the device is plugged in to charge, if temperature of the device is lower than -5℃ or higher than 45℃ , the screen will respectively display “BATTERY TOO COLD” or “BATTERY TOO HOT”. In both situations, the device won’t charge. If the temperature reaches even higher than 50℃ during charging, the device won’t charge until temperature drops lower than 45℃ again.

Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings
1.Please keep out of reach of children.
2.This Product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication
1.Do not attempt to repair the product by yourself as damage or personal injury may occur.
2.Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3.Do not use this product for other purposes except only for vaping and don't swallow the e-liquid.

Possible Adverse Effects
1.This product may be hazardous to health and contains nicotine which is addictive.
2.For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

No comments

Powered by Blogger.