Header Ads

User Manual For Eleaf iStick 20W

Notice for Use 
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit Eleaf official website at www.eleafworld.com.

If it is purchased from our website,Any questions you can contact us on our facebook.
Product Introduction 
iStick is an knock-out product implementing the latest technology with a metallic appearance. Its trait is the appearance artful, easy to take. There are four colors for your option: black, silver, red and blue. Meanwhile, the output wattage is strong, up to 20W. The highlight is the incremental OLED screen displaying battery condition, resistance, wattage and voltage. You can know them clearly at a glance. The voltage is adjustable vary from 3.0V to 5.5V according to your vaping habit.

Parameter 
Size: 75mm*21mm*32.8mm
Color: black, sliver, red, blue
Capacity: 2200mAh
Thread Type: 510 Thread

How to use 
Press the square button for five times to turn on the battery, and then long press the square button to get a puff.
Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on.
Adjust the voltage/wattage: Press the plus or minus direction button to increase or decrease the voltage/wattage. The voltage is adjustable vary from 3.0V to 5.5V, and the wattage can be up to 20W. Long press the plus or minus direction button to enter the AUTO mode, increase or decrease voltage/wattage by 0.1V/W. Press the plus or minus direction button again, increase or decrease voltage/wattage by 0.2V/W. If still press the plus or minus direction button one more time, then increase or decrease voltage/wattage by 0.5V/W. Press the plus or minus direction button to choose the voltage/wattage you want. If you want to choose the voltage/wattage halfway, just press the opposite direction button to stop the increasing or decreasing voltage/wattage.


How to charge 
iStick is charged through USB port at the bottom. One can take puffs while it is being charged.
Precautions
a) Only have your iStick repaired by Eleaf . Do not attempt to repair the unit by yourself as damage or personal injury may occur.
b) Do not leave the iStick in high temperatures or damp conditions, otherwise it may be damaged. The appropriate operation temperature is within 0℃to45℃ while charging and -10℃ to 60℃ while using.
c) Do not attempt to combine the iStick with parts from other brands of e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.


Warranty 
Please consult your Eleaf Product warranty card. We are not responsible for any damages caused by human error. Our warranty is not available for products purchased from third-party vendors.

No comments

Powered by Blogger.